Fire Risk Assessments – Chorley

The Regulatory Reform (Fire Safety) Order 2005 applies in England and Wales. It covers general fire precautions and other fire safety duties which are needed to protect ‘relevant persons’ in case of fire in and around most ‘premises’. The Order requires fire precautions to be put in place ‘where necessary’ and to the extent that it is reasonable and practicable in the circumstances of the case.

Responsibility for complying with the Order rests with the ‘responsible person’. In a workplace, this is the employer and any other person who may have control of any part of the premises, e.g. the occupier or owner. In all other premises the person or people in control of the premises will be responsible. If there is more than one responsible person in any type of premises (e.g. a multi occupied complex), all must take all reasonable steps to co-operate and co-ordinate with each other.

If you are the responsible person you must carry out a fire risk assessment which must focus on the safety in case of fire of all ‘relevant persons’. It should pay particular attention to those at special risk, such as disabled people, those who you know have special needs, and children, and must include consideration of any dangerous substance liable to be on the premises. Your fire risk assessment will help you identify risks that can be removed or reduced and decide the nature and extent of the general fire precautions you need to take.

If your organisation employs five or more people, your premises are licenced or an alterations notice is in force, you must record the significant findings of the assessment.

We carry out fire risk assessments in schools, leisure centres, theatres, residential care homes, commercial premises, shops and offices.

All our fire safety equipment and products are quality assured and the service and maintenance of fire extinguishers is undertaken to BS5306-3 2017.

Accreditation

We are accredited to Safecontractor and all our technicians hold the IFEDA (Independent Fire Engineering & Distributors Association)
Certification which has been approved by the British Standards Institute and BAFE training requirements of SP101.